EasyManua.ls Logo

RCH Onda - Security Norms and Regulations

RCH Onda
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
1.1 SECURITY NORMS AND REGULATIONS
This instrument is suitable to certify the trade operations performed on public
areas (hawkers). Use the battery charger - AC230V 50Hz/24VDC feeder only in
protected environment, meaning in closed areas, far from rain and humidity. The
machine is waterproof according to the current provisions, IPX1 waterproof level.
Long exposures under heavy rain.
Whereas RCH authorised technicians solely must install RCH ONDA,
it is reminded that for proper operations the following instruction
must be complied with:
Upon installation verify that the power plug is close to the machine and may be
easily accessed during the normal operations of the machine.
Only connect original feeders provided for this machine. Any different type
feeder may damage the machine or prevent its proper operations.
Do not place ONDA in unstable surface. It may fall and seriously get damaged.
The machine includes a LITHIUM battery that may be recharged. For its
replacement it is necessary to address solely the RCH authorised technicians.
Avoid the operations of the machine in places too cold or hot or hit by solar rays
for long time (proper operations are ensured at temperature between -10°C and
45°C). Do not use, in the open air, a machine installed for the use in closed
environment.
The fiscal measurer provides for the warning of the coming exhausting of the
rolls through visual warning. Therefore, rolls with coloured ends must be used.
Only connect drawers with original change return.
The use of any non-original accessories or spare parts would cancel the right to
the warranty.
In case of malfunctioning of the machine, please address a service centre
authorised by RCH.
8
In case of any faults or malfunctioning preventing the proper operations of the
machine from the fiscal standpoint, the cash register blocks and a short
message would appear on the display. An acoustic message is also heard.
In these cases the machine must be switched off and the technical
assistance service of the RCH Authorised Centre must be asked for.
The machine must undergo a revision (preventive maintenance) at least once
a year or, in any case, not over one year from the date of the last service
performed as resulting from the fiscal book.
When the Fiscal Memory is about to finish, on the heading to the receipts of
the daily setting to zero would appear the message “fiscal memories near to
finish – XX closures”.
Such message is printed starting from 60 setting to zero before the
completion of the Fiscal Memory and, therefore, the user gets the warning
about two months before.

Table of Contents

Related product manuals