21
Main Menu - Thermostat Info
The Thermostat Info screen displays the current configuration of the TR65 Thermostat. This information is
useful for quick check of firmware versions and HVAC system setup. It also shows the network address
setting. Setup information can only be viewed on this screen and not changed. The HVAC system setup
is set by the dipswitch SW1 on the HVAC Control Unit. The RS485 address is set in the “Installer
Settings” menu.
Thermostat information displayed is:
Wall Display Unit – Model and firmware version number.
HVAC Control Unit – Model and firmware version number.
System Type - Standard or Heat Pump HVAC system
Fan Type (if HVAC type = Standard): Gas or Electric
OR
Changeover Type (if HVAC type = Heat Pump): Changeover with cool or changeover with heat.
Network Address: shows the RS485 address of the thermostat (and zone number if installed on
a zone system)
When finished viewing this screen press the Done button to return to the main Menu screen or wait for
screen to timeout.
Thermostat Info Screen
TS65 Ver 04.01.8
ZCV1 Ver: 1.06.2
System Type: Standard
Fan Type: Gas
Network Address: 1 (Zone:1)
Press DONE button to exit back to Main
Menu screen.
To Next Page
Loading...
Need help?
General
