39 | P a g e
Room thermostat (Transmitter Operation)
The remote control can operate as a room thermostat. The thermostat can be set to a desired temperature
to control the comfort level in a room.
To activate this function, press the thermostat key. The LCD display on the transmitter will change to show
that the room thermostat is “ON” and the set temperature is now displayed. To adjust the set temperature,
press the up or down arrow keys until the desired set temperature is displayed on the LCD screen of the
transmitter.
Smart thermostat (Transmitter Operation)
The smart thermostat function adjusts the flame height in accordance with the difference between the set
point temperature and the actual room temperatures. As the room temperature gets closer to the set point
the smart function will modulate the flame down. To activate this function, press the thermostat key until
the word “SMART” appears to the right of the temperature bulb graphic.
To adjust the set temperature, press the up or down arrow keys until the desired set temperature is
displayed on the LCD screen of the transmitter.
Note: When the smart thermostat is activated, manual flame height adjustment is disabled.
Smart flame function
Fan speed control - this function is not supported on this fire.
Remote dimmer control (Light) - this function is not supported on this fire.
Split flow control - this function is not supported on this fire.
To Next Page
Loading...
