Tip1：After scanning “UPCE 2-Digit-On”，“UPCE 5-Digit-On”，there is a
certain probability that the scanner can only read the first 8 digit but not the
last 2/5 code.
Tip2：To set the scanner to read UPCE Code and 2/5 digits 100%， scan the
code“UPCE 2-Digit-On“，“UPCE 5-Digit-On”，“UPCE+2/5 Digit-On”in order.
Tip3：After setting the scanner to 100% read“UPCE+2/5 Digit”，the UPCE
without supplemental Symbology can not be read.
To Next Page
Loading...
