Tip1：After scanning“EAN8 2-Digit-On”，“EAN8 5-Digit-On”，there is a certain
probability that the scanner can only read the first 8 digit but not the last 2/5
code.
Tip2：To set the scanner to read EAN8 Code and 2/5 digits 100%， scan the
code“EAN8 2-Digit-On“，“EAN8 5-Digit-On”“EAN8+2/5 Digit-On”in order.
Tip3：After setting the scanner to 100% read“EAN 8+2/5 Digit”，the EAN 8
without supplemental Symbology can not be read
To Next Page
Loading...
