Tip1：After scanning “EAN13 2-Digit-On”，“EAN13 5-Digit-On”，there is
a certain probability that the scanner can only read the first 13 digit but not
the last 2/5 code.
Tip2：To set the scanner to read EAN13 Code and 2/5 digits 100%， scan the
code“EAN13 2-Digit-On“，“EAN13 5-Digit-On”，“EAN13+2/5 Digit-On”
in order.
Tip3：After setting the scanner to 100% read“EAN 13+2/5 Digit”，the EAN 13
without supplemental Symbology can not be read.
To Next Page
Loading...
