Reboot RBM1350 - Part 2: Product and Configuration List; Part 3: Simple Test for Powering On

Version Number: RBM-1350 20210712A2
2
No.
Picture
Name
Qty
Remark
1
RBM1350
1
Please check outside of the whole machine no
scratch and break , it can power on normally.
2
Welding
torch
1
2M, MIG welding torch, Installed on the
machine and connected with the machine as a
whole.
4
Ground
clamp
1
2m 16MM2 cable, 150A Ground clamp
+10-25mm2 European quick plug.
12
Wire feed
wheel
1
The gear wire feed wheel is suitable for
flux-cored welding wire diameter
0.8mm/0.9mm, installed on the machine.
13
Flux cored
wire
1
0.5KG diameter 0.8mm 0,030", suitable for
gasless MIG welding, consumables should be
replaced in time, please keep in stock.
Brush
1
Clean up welding slag.
Protective
mask
1
Protection from arc light.
Strap
1
The machine is lightweight, can be used with
a strap, and it is easy to move.
Protective
gloves
1
Protection from arc light.
14
Manual
1
Normally provides manuals in English, if you
need other language like French, German,
Italian, Spanish, and Russian please contact
us to get electronic version documents.
Part 3: Simple test for powering on the machine