Reboot RBM1350 - Part 4: Technical Specifications; Part 5: Machine Operation Guidance

Version Number: RBM-1350 20210712A2
3
RBM1350(MIG135E) Welding machines will be subjected to strict various tests when they leave the factory
to ensure that each welding machine that reaches the user is of high quality, because our machine has to go through
tens of thousands of kilometers of long-distance transportation from the factory to the delivery to you. It’s inevitable
that some uncontrollable factors will cause some internal components of the machine to become loose or even
damaged in the process. We recommend that you check the external device as soon as you get the welder, and turn
on the power to check to ensure that you receive It is a qualified product.
Precautions for power-on inspection:
1、 Please make sure your power supply voltage is 110V+-15% or 220+-15%. MIG135E supports 110V input
voltage in North America and Japan, and RBM1350 supports 220V input voltage in the UK, EU and other
regions; if you have a generator power supply, please ensure that the generator is not less than 4000w.
2、 It is recommended to choose 30A circuit breaker protection when input voltage is AC 110V and choose 20A circuit
breaker protection when input voltage is AC 220V.
3、 Please choose the power plug that suits your local electrical law requirements.
4、 The fan has a sleep function, and it may not rotate after it is turned on. This is normal. The fan will only
rotate when the welding machine is welding for a period of time and the machine heats up.
Attached table: Self-examination of abnormal conditions without response when turning on the machine:
1. The machine's power switch Knob is not turned on.
2. The power input voltage is wrong.
3. The power plug is loose.
4. The internal circuit is loose (due to long-distance transportation, bumps), you need to open the cover and
check the internal connection line.
Part 4: Technical specifications
Item
MIG135E
RMB 1350
Power supply
（
V
）
1 phases 110V±15%
1 phases 230V±15%
Frequency（Hz）
50/60
50/60
No-load voltage(V)
50
58
Rated input current(A)
21.5
13.4
Output current adjustment range(A)
30 - 90
45-100
Output voltage(V)
15.5 - 18.5
15.5 - 18.5
Duty cycle
80A@25%
90A @20%
Power factor
>0.7
>0.7
Efficiency(%)
≥80
≥80
Type of the wire feeder
Internal
Internal
Welding-wire diameter (mm)
0.8
0.8
Insulation grade
F
F
Protection grade
IP21S
IP21S
Weight without wire roller(kg)
5.5
5.4
Dimension(L*W*H mm)
318*135*240
318*135*240
Part 5: Machine operation guidance.