Contents | 3
1 PRODUCT OVERVIEW
The BCDC1220(-IGN) In-Vehicle Battery Charger
features technology designed to charge your
batteries to 100%, regardless of their type or size. By
providing a unique charging profile to each specific
battery type, the BCDC1220(-IGN) In-Vehicle Battery
Charger is able to achieve and maintain an optimal
charge in your auxiliary battery, at all times. The
BCDC1220 is designed to work with either fixed
voltage or temperature compensating alternators
while the BCDC1220-IGN is designed to operate
with variable voltage alternators.
2 WARNINGS AND SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS — This manual contains important safety instructions for the
BCDC1220 and BCDC1220-IGN Battery Charger.
Do not operate the Battery Charger unless you have read and understood this manual and the
Charger is installed as per these installation instructions. REDARC recommends that the Charger be
installed by a suitably qualified person.
Disclaimer: REDARC accepts no liability for any injury, loss or property damage which may occur
from the improper or unsafe installation or use of its products.
SAFETY MESSAGE CONVENTIONS
Safety messages in this manual include a signal word to indicate the level of the hazard as follows:
WARNING
Indicates a potentially hazardous situation which could result in death or
serious injury to the operator or to bystanders.
CAUTION
Indicates a potentially hazardous situation which may result in moderate or
minor injury to the operator or to bystanders.
NOTICE
Indicates a situation that may cause equipment damage.
WARNING
Risk of explosive gases: Working in vicinity of a Lead-Acid battery is dangerous. Batteries
generate explosive gases during normal operation. For this reason, it is of utmost
importance that you follow the instructions when installing and using the Charger.
To Next Page
Loading...
Need help?
General
