24
4. Product Description
The flight model “Flamingo” is a model plane which is only intended for experienced model plane pilots. Broad knowledge in the handling of model airplanes is
absolutely required to assemble and operate this model.
This manoeuvrable model is not suitable for beginners!
The model has been completely produced in wood and applied with multi-coloured iron-on foil. The canopy is glued together ready for operation and applied with
a quick-closure. In addition to the main components mentioned above, the package includes all required rudder linkage parts, and a two-legged landing gear
with tail spur.
The user can control: Aileron, elevator and rudder, tail spur as well as speed control of the motor.
The servos required for operation, motor with muffler or electric motor with speed controller, rechargeable batteries and required material like plug/sockets, etc.
are not part of the scope of delivery and must be purchased separately.
See our catalogues at www.conrad.com for tried and tested accessories.
The flight model “Flamingo” is designed for advanced model constructors with comprehensive know-how in assembly and operation of such flight
models. These operating instructions include indicative figures for each construction section that present the most essential parts. Special features
are noted in the text.
These operating instructions, as well as the suggestions on the required accessories (servos, motor, etc.) are a proven manner of assembly and
service optimisation. Models of the present category are, however, usually assembled according to the user’s own wishes, ideas and personal
needs. However, the following generally applies: The more precise the build, the more precise the later flight characteristics.
To Next Page
Loading...
