Reely 1611412 - B) Inserting The Flight Battery; C) Checking the Drive

45
b) Inserting the ight battery
Thechargedightbattery(1)isinsertedintothebatterycompartment(2)fromabove.
Important:
The battery power cable must be guided to the left or right through the opening on the side (3). Then the
batteryisxedinplacewiththehook-and-looptape(4).Theradioantenna(5)shouldbealignedvertically
upwardsforightoperation.
Figure 5
c) Checking the drive
Before starting the quadrocopter, you have to test the
drive. Only when all four propellers run smoothly and in
aperfectcirclecanthemodelbeownwiththeminimum
energy consumption. For this reason, you should check
thefunctionofthedrivepropellersbeforeeachight.
To do this, turn each individual propeller carefully with your
ngerandchecktheconcentricityandtheeaseofmove-
ment.
When doing this, pay attention to the rotational directions
of the various propellers. Two propellers turn clockwise
when seen from above (A) and two propellers turn anti-
clockwise (B).
Figure 5
Figure 6