Reer EOS4 User Manual

EOS4 SAFETY LIGHT CURTAIN
8540733 • 10th February 2009 • Rev.1 31
English
GUARANTEE
All new EOS4 systems are guaranteed by REER for a period of 12 (twelve) months under
normal working conditions, against defects due to faulty materials and workmanship.
During the aforesaid period, REER promises to replace faulty parts free of charge. This
guarantee covers both material and labour.
REER reserves the right to decide whether to repair equipment or replace it with
equipment of the same type or having the same characteristics.
The validity of this guarantee is subject to the following conditions:
• The user must notify REER of the fault within twelve months following the date of
delivery of the product.
• The equipment and all parts thereof must be in the condition in which they were
supplied by REER.
• The defect or malfunction must not arise directly or indirectly from:
- Improper use
- Non-observance of the instructions for use;
- Negligence, inexperience, improper maintenance;
- Repairs, modifications and adjustments carried out by personnel not
authorised by REER, tampering, etc.;
- Accidents or collisions (also during transportation or due to acts of God);
- Other reasons for which REER cannot be held responsible.
Repairs will be carried out at REER’s laboratories, to which the material must be
consigned or forwarded: transport costs and any damage or loss of material during
transportation will be charged to the Customer.
All replaced products and parts are property of REER.
REER does not recognise any other form of guarantee or rights other than those expressly
stated above; no requests for compensation for damages incurred for costs, suspension
of activities or any other events or circumstances related in any way to malfunctioning of
the product or any parts thereof will be taken into consideration.
 Precise, complete compliance with all the indications and warnings indicated in this
manual is essential for correct operation of the light curtain. Therefore, REER s.p.a.
declines any responsibility for defects caused by even partial non-compliance with
such indications.
Characteristics liable to modifications without prior notice. • Complete or partial reproduction is forbidden without REER’s prior authorisation.

Reer EOS4 Specifications

General

Power Supply	24 VDC ±20%
Resolution	14 mm
Safety Category	Type 4
Operating Temperature	+55 °C
Protection Rating	IP65
Detection Capability	Opaque objects
Connection	M12 connector
Response Time	≤ 20 ms
Outputs	2 x safety outputs (OSSDs)