26
Regency
®
P36D-1 Zero Clearance Direct Vent Gas Fireplace
INSTALLATION
• Vent must be supported at offsets.
• Firestops are required at each fl oor level and whenever passing through a wall.
• Maintain clearances to combustibles.
Note: Must use optional rigid pipe adaptor when using rigid vent systems (Part # 510-994).
VENTING ARRANGEMENTS
VERTICAL TERMINATION
RIGID PIPE SYSTEM
(Propane & Natural Gas)
The shaded area in the diagram shows all allowable combinations of straight vertical and offset to vertical terminations, using two 90
o
elbow, with
rigid pipe vent systems for Propane and Natural Gas.
To Next Page
Loading...
