REMdevice t3 User Manual

Instruction Manual
Radio control devices T3, T5 and T7.
version 1.4 Genn. 10
SUMMARY
• Instructions for correct and safe use of the radio control
device ........................................................................... 3
• Installation of the radio control device ........................... 7
• Arrangement and description of controls ...................... 10
• Inspection of the radio control device............................ 16
• Keeping the radio control device in good working order 17
• Changing the battery ................................................... 18
• Changing the transmitter .............................................. 19
• Programming the radio control device .......................... 20
• Diagnostics .................................................................. 24
• Operating principle ..................................................... 25
• Identification of the fuses ............................................ 26
• Technical Characteristics ............................................. 27
• Guarantee conditions .................................................. 28
ATTENTION!
Before installing and/or using the radio control device,
CAREFULLY READ this instructions manual and follow
the advice it contains. Use of the radio control device
by non qualified personnel and/or incorrect
installation may cause severe harm to persons and
things.
page 2 of 28 REMdevice
®
- ITALY

REMdevice t3 Specifications

Operating Environment

operative frequency range 1	869.700 – 870.000 MHz
operative frequency range 2	433.050 – 434.790 MHz
operating and storage temperature	-20°C / +70°C

Power

power supply option 1	12-24Vdc 1, 0A
power supply option 2	24-48Vac/dc 50-60 Hz 0.4A
power supply option 3	48-115Vac/dc 50-60 Hz 0.4A
power supply option 4	115-230Vac/dc 50-60 Hz 0.2A

Receiver Specifications

command relay contacts capacity	4A 115 Vac.
stop relay contacts capacity	4A 115 Vac.
range of control	100 mt.

Transmitter Specifications

radio frequency output power	1 to 10 mW
supply voltage	3.6 Vdc.
power consumption range	13.5 mA to 24 mA
battery	integrated lithium ions 3.6V
working autonomy	up to 1200 hours (20°C)
low battery warning	at 30 hours left

Dimensions and Weight

container dimensions	158×90×75 mm (L×H×D)
watertight case Ruby-T7 dimensions	169×266×89 mm (L×H×D)
watertight case ECOBOX dimensions	124×176×45 mm (L×H×D)
transmitter dimensions	176x85x37 mm (L×H×D)
transmitter weight	350 g