Instruction Manual
Radio control devices T3, T5 and T7.
version 1.4 Genn. 10
INSTRUCTIONS FOR CORRECT AND SAFE
USE OF THE RADIO CONTROL DEVICE
The use of the radio control device is reserved to expert operators
who have read the instructions on the conditions of use of the radio
controlled machine and who respect the safety regulations imposed
by law in the work area.
The manufacturer of the radio control device does not answer for
damage to persons or things caused by:
• clumsy and improper use of the radio control device;
• incorrect wiring or electrical connection;
• tampering;
• modification of the structural characteristics of the radio
control device;
• replacement of parts with non original spare parts;
• lack of maintenance;
• failure to replace worn, broken or faulty parts;
• use of the radio control device bypassing its intrinsic safety
or in any way altering its original functionality.
The radio control device operates with radio signals, it is able to
operate the machine to which it is connected even in the presence of
barriers that prevent visibility, such as: masonry walls, metal or
wooden panels, machines, equipment, buildings, vehicles, etc.
Use of the radio control device
• Place the transmitter in conditions of perfect and complete
visibility of the radio-controlled machine;
• do not stand under hanging weights;
• do not operate in a position of unsafe equilibrium;
• pay attention to the identification symbols of the control
device located next to each button;
• avoid pressing the buttons if you do not know exactly what
their function is.
REMdevice
®
- ITALY
page 3 of 28
To Next Page
Loading...
Need help?
Operating Environment
Power
