REMKO ML Series User Manual

The illustration of the LCD with all of the sym-
bols present is only intended to provide a
clearer overview
. During operation, only those
symbols relevant to the respective functions
appear on the display.
Key functions
A symbol is shown on the display to indicate that
the settings are being transferred.
“Auto” mode (please observe notes!)
Make sure that the indoor unit is connected to the
power supply
, and is switched on.
The operating mode indicator on the display of the
indoor unit begins to flash.
1. Press the "MODE" key to select "Auto"
mode.
2. Press the "Arrow up/down" key to set the
desired temperature. The temperature can
be set between 17 and 30°C, in increments
of 1°C.
3. Press the "ON/OFF" key to switch on the air
conditioning unit.
1
3
2
Fig. 10: "Auto" mode
"Cooling", "Heating" and "Recirculation" mode
Make sure that the indoor unit is connected to the
power supply
, and is switched on.
1. Press the "MODE" key to select from oper-
ating modes "Cooling", "Heating" or "Recircu-
lation".
2. Press the "Arrow up/down" key to set the
desired temperature. The temperature can
be set between 17 and 30°C, in increments
of 1°C.
3. Press the "F
AN" key to select from the four
fan speeds (Auto, slow, medium and fast).
4. Press the "ON/OFF" key to switch on the air
conditioning unit.
1
4
2
3
Fig. 11: "Cooling", "Heating" and "Recirculation"
mode
17

REMKO ML Series Specifications

General

Brand	REMKO
Model	ML Series
Category	Air Conditioner
Language	English