2
4
3
5
6
NU760_1_G3-FRA.qxd 9/11/05 17:18 Page 3.47
3.47
REAR SEATS: adjustment
To move the seat forwards or
back
Lift control 2, handle 3 or pull on
strap 6.
Release the control at the chosen
position and the seat will lock into
the nearest position. Make sure the
seat is correctly locked in position.
It is advisable to carry out any
adjustments when the vehicle is
stationary.
To adjust the angle of the
seatback
- Pull handle 4 and adjust the angle
of the seatback.
or
- Pull strap 5 and adjust the angle of
the seatback.
Table function
An occasional table position can be
created by folding the seatback all
the way down onto the seat base.
When moving the rear
seats, check that the
anchorage points and rails
are clean (they should be
free from grit, cloths, toys, etc.)
NU760_1_G3-ENG.qxp 27-Dec-05 18:41 Page 3.47 (Black/Process Black plate)
To Next Page
Loading...
