NU760_1_G3-FRA.qxd 9/11/05 17:18 Page 3.48
REAR SEAT FUNCTIONS
3.48
The rear seats are separate seats.
Each seat is anchored onto two rails.
There can be up to three seats on the
first rear row and up to two seats on
the second rear row.
They can be positioned forward-
facing, which is the required
position for driving the vehicle, or
in the rear-facing position.
Some examples of seat positions are
shown and details given below.
First example: the five rear seats are
fitted.
If the vehicle is fitted with armrests,
it is necessary to take them out
before removing the three seats in
the first back row (refer to
information on Rear Seats: Armrests
on the previous pages).
Second example: two seats fitted in
the rear spaces.
When moving the rear
seats, check that the
anchorage points and rails
are clean (they should be
free from grit, cloths, toys, etc.)
NU760_1_G3-ENG.qxp 27-Dec-05 18:41 Page 3.48 (Black/Process Black plate)
To Next Page
Loading...
