A
B
4
3
1
2
NU760_1_G3-FRA.qxd 9/11/05 17:18 Page 3.49
3.49
REAR SEAT FUNCTIONS (continued)
Then fit seat 3, with its seatback
pulled down, and move it forward
as far as possible; next, fit the rear-
facing seat 4, with its seatback
pulled down, onto rails B then
position it as far back into the
vehicle as possible and push back
seats 3 then 2 then front seat 1.
Third example: all the seats are
taken out.
Fourth example: the seats are in
storage position.
Move front seat 1 forward. Fit seat 2,
with its seatback pulled down, onto
rails A, and move it forward as far as
possible.
Special case: seats mounted in the
rear-facing position
The rear-facing seat
position should only be
used when the vehicle is
stationary.
NU760_1_G3-ENG.qxp 27-Dec-05 18:41 Page 3.49 (Black/Process Black plate)
To Next Page
Loading...
