2
4
3
5
6
C
7
NU760_1_G3-FRA.qxd 9/11/05 17:18 Page 3.50
REAR SEAT FUNCTIONS (continued)
3.50
To remove a seat
Lower the headrest.
Lift control 2 or 3 or pull on strap 6
in order to push the seat back.
Lift handle 4 or pull strap 5 in order
to pull down the seatback.
Pull handle 6 to the bottom, and
move the seat forwards, pulling it off
the rails.
Use strut 7 to remove the seat from
vehicle.
Check that there are no objects
stored behind trim C.
Note: Strap 6 can be released as soon
as the seat has been completely
removed from the rails.
When the seat is removed from the
rails, the seatback is locked in the
parcel shelf position.
Do not attempt to open the
seatback as this may damage the
seat.
- If seats are removed from the
vehicle and stored elsewhere,
make sure that they are kept in a
clean place, so as to avoid contact
with foreign bodies.
- The seats are not designed to be
used other than in the vehicle.
The seats are fitted with certain
mechanisms and their function
may be compromised if they are
misused or dropped.
See your RENAULT dealer if a
seat is dropped.
When moving the rear seats,
check that the anchorage
points and rails are clean
(they should be free from
grit, cloths, toys, etc.)
NU760_1_G3-ENG.qxp 27-Dec-05 18:41 Page 3.50 (Black/Process Black plate)
To Next Page
Loading...
