CHILD SEATS
2
Getting to know your vehicle - 101
Ensure that the child
seat or the child's feet do
not prevent the locking in
place of the seat in front
🡺78 and 🡺73.
Before installing a child
seat on one of the rear
seats, ensure that the
"Easy Access Seat"
function is deactivated for the
driver's and/or front passenger
seats 🡺131.
RISK OF INJURY.
In all situations, remove the headrest
of the rear seat on which the child seat
is positioned 🡺78.Ifnecessary,posi-
tiontherearseatasfarbackaspossi-
ble. This must be done before fitting
the child seat. Check that the child
seat is resting against the back of the
rear seat.
Fitting a seat ISOFIX in
the rear-left seat means
the middle seat cannot
be used. The central
seat belt will no longer be either
accessible or useable.
Fit the child seat in a
rearseatwhereverpos-
sible.
To install an ISOFIX seat
in this seat, unbuckle the seat belt
by hand before engaging the
bolts.
Installing a booster seat (group 2 or
3)
Check that the seat belt 🡺80 operates
(winds) correctly.
Adjust the seat belt by positioning:
– theshoulderstraponthechild’s
shoulder without touching the neck;
– the lap strap so that it lies flat on the
thighs and against the pelvis.
If necessary, adjust the position of the
vehicle seat.