LIGHTING AND SIGNALS
2
150 - Getting to know your vehicle
Examples of posi
tions for adjust
ing the switch
A
according to the
load
Driver alone or
with front pas
senger
0
All seats occu
pied
1
Driver with
passengers
and luggage
(or load)
reaching the
maximum per
missible all-up
weight
3
Driver without
passengers
and luggage
(or load)
reaching the
maximum per
missible all-up
weight
4
The table below gives some examples.
In all cases, adjust the control
A
ac-
cording to the vehicle load so that the
road can be seen and other drivers are
not dazzled.
When driving on the left-
hand side of the road in a
left-hand drive vehicle (or
vice versa), you must adjust your
headlights for the length of your
stay.
To Next Page
Loading...
