2
3
4
5
3
NU650_12_G5-FRA.qxd 9/12/04 12:03 Page 5.26
TRAFIC - NU 650-12 X83
C:\Documentum\Checkout\NU650-12_T5-ENG.win 17/12/2004 7:29
-page26
5.26
TOWING: breakdown (continued)
Rear towing point 4
(Vehicle with towing equipment.)
Front towing point 5
Access to towing hitch 3.
It is located in tool kit 2: turn the
whole of the tool kit to extract it.
When the engine is
stopped, steering and
braking assistance are
not operational.
First screw in towing hitch
3 by hand as far as it will
go. Then use the
wheelbrace from the tool
kit to finish tightening it.
When storing the tools,
check that they are
correctly placed in tool kit
2 as before, (refer to the
drawings engraved in the tool kit),
and store the kit under the seat
(refer to the drawings engraved on
the cover). Do not leave the tools
unsecured as they may come loose
under braking.
To Next Page
Loading...
