Renesas RL78/G1D User Manual

RL78/G13 CHAPTER 29 ELECTRICAL SPECIFICATIONS
R01UH0146EJ0100 Rev.1.00 1019
Sep 22, 2011
Caution The pins mounted depend on the product. Refer to 2.1.1 20-pin products to 2.1.14 128-pin products,
and 2.1.15 Pins for each product (pins other than port pins).
(7) Communication at different potential (2.5 V, 3 V) (f
MCK/2) (CSI mode) (master mode, SCKp... internal clock output)
(TA = −40 to +85°C, 2.7 V ≤ EVDD0 = EVDD1 ≤ VDD ≤ 5.5 V, VSS = EVSS0 = EVSS1 = 0 V)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
200
Note 1
ns SCKp cycle time tKCY1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
300
Note 1
ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
t
KCY1/2 − 50 ns SCKp high-level width tKH1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
t
KCY1/2 −
120
ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
t
KCY1/2 − 7 ns SCKp low-level width tKL1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
t
KCY1/2 − 10 ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
58 ns
SIp setup time
(to SCKp↑)
Note 2
t
SIK1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
121 ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
10 ns
SIp hold time
(from SCKp↑)
Note 2
t
KSI1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
10 ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
60 ns
Delay time from SCKp↓ to
SOp output
Note 2
t
KSO1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
130 ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
23 ns
SIp setup time
(to SCKp↓)
Note 3
t
SIK1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
33 ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
10 ns
SIp hold time
(from SCKp↓)
Note 3
t
KSI1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
10 ns
4.0 V ≤ EVDD0 ≤ 5.5 V, 2.7 V ≤ Vb ≤ 4.0 V,
C
b = 20 pF, Rb = 1.4 kΩ
10 ns
Delay time from SCKp↑ to
SOp output
Note 3
t
KSO1
2.7 V ≤ EV
DD0 < 4.0 V, 2.3 V ≤ Vb ≤ 2.7 V,
C
b = 20 pF, Rb = 2.7 kΩ
10 ns
(Note, Caution and Remark are listed on the next page.)

Renesas RL78/G1D Specifications

General

Brand	Renesas
Model	RL78/G1D
Category	Computer Hardware
Language	English