Renesas RL78 - Functions

RL78/G11 UART Reception in STOP Mode Using Middle-speed On-chip Oscillator IAR
R01AN3634EJ0100 Rev.1.00 Page 18 of 85
Feb. 15, 2017
5.7 Functions
Table 5.6 shows the list of functions used in the sample code.
Table 5.6 Functions
Function Name Outline
hdwinit Initialization function
R_Systeminit Peripheral function initialization function
R_PORT_Create Port initialization function
R_CGC_Create CPU clock initialization
R_TAU0_Create TAU0 initialization function
R_SAU0_Create SAU0 initialization function
R_UART0_Create UART0 initialization function
R_INTC_Create INTP initialization function
main Main processing function
R_MAIN_UserInit Main user initialization function
R_UART0_Receive UART0 reception status initialization function
R_UART0_Start UART0 operation start function
r_tau0_baudrate_correction TAU0 Baud rate setting function
R_INTC11_Start INTP11 operation start function
R_TAU0_Channel3_Start TAU0 channel 3 operation start function
R_TAU0_Channel1_Start TAU0 channel 1 operation start function
R_TAU0_Channel1_Stop TAU0 channel 1 operation stop function
R_TAU0_Channel3_Stop TAU0 channel 3 operation stop function
r_processing_pause Wait function for LED blinking
r_tau0_channel3_interrupt TAU0 channel 3 count complete interrupt function
r_intc11_interrupt INTP11 interrupt processing function
r_uart0_interrupt_receive UART0 reception complete processing function
r_uart0_callback_softwareoverrun UART0 receive data number overrun processing function
r_uart0_callback_receiveend UART0 reception complete processing function
r_uart0_interrupt_error UART0 error interrupt function
r_uart0_callback_error UART0 reception error processing function