Renesas RL78 - Function Specifications

RL78/G11 UART Reception in STOP Mode Using Middle-speed On-chip Oscillator IAR
R01AN3634EJ0100 Rev.1.00 Page 19 of 85
Feb. 15, 2017
5.8 Function Specifications
The following shows function specifications for the sample code.
Function name: hdwinit
Outline Initialization function
Header intrinsics.h
Declaration void hdwinit(void)
Description Initial setup of peripheral functions.
Argument None
Return value None
Additional notes None
Function name: R_Systeminit
Outline Peripheral function initialization function
Header None
Declaration void R_Systeminit(void)
Description Initial setup of peripheral functions described in this application note.
Argument None
Return value None
Additional notes None
Function name: R_PORT_Create
Outline Port initialization function
Header r_cg_port.h
Declaration void R_PORT_Create(void)
Description Initializes ports.
Argument None
Return value None
Additional notes None
Function name: R_CGC_Create
Outline CPU clock initialization function
Header r_cg_cgc.h,intrinsics.h
Declaration void R_CGC_Create(void)
Description Initial setup of CPU clock.
Argument None
Return value None
Additional notes None
Function name: R_TAU0_Create
Outline TAU0 initialization function
Header r_cg_tau.h
Declaration void R_TAU0_Create (void)
Description Initial setup of TAU0 channels.
Argument None
Return value None
Additional notes None