Renesas RL78 - Conditions for Confirming Operations; Related Application Notes

RL78/G11 UART Reception in STOP Mode Using Middle-speed On-chip Oscillator IAR
R01AN3634EJ0100 Rev.1.00 Page 4 of 85
Feb. 15, 2017
2. Conditions for Confirming Operations
Operations for the sample code discussed in this application note were confirmed under the following conditions.
Table 2.1 Conditions for Confirmation Operations
Item Description
MCU RL78/G11 (R5F1056A)
Operating frequency
 Middle-speed on-chip oscillator clock (f
IM
): 4MHz (UART
communication)
 High-speed on-chip oscillator clock (f
IH
): 24MHz (with MOCO
frequency correction)
Operating voltage 3.0V (operating range1.6V to 3.6V)
LVD operations (V
LVD
): Reset mode 2.81V (2.76V to 2.87V)
Integrated development
environment
IAR Embedded Workbench for Renesas RL78 V2.21.2
C compiler IAR C/C++ Compiler for Renesas RL78 V2.21.1.1833
3. Related Application Notes
Applications notes related to this document are shown below.
 RL78/G13 Initialization CC-RL (R01AN2575EJ)
 RL78/G11 Serial Array Unit (UART Communication) IAR (R01AN3646EJ)
 RL78/G11 UART communication with middle speed on chip oscillator IAR (R01AN3621EJ)