Renesas RL78 - Wait Function for LED Blinking; TAU0 Channel 3 Count Complete Interrupt Function

RL78/G11 UART Reception in STOP Mode Using Middle-speed On-chip Oscillator IAR
R01AN3634EJ0100 Rev.1.00 Page 79 of 85
Feb. 15, 2017
5.9.18 Wait function for LED blinking
Figure5.24 shows the flowchart for the wait function for LED blinking.
r_processing_pause
return
LED wait completed?
Yes
No
Initialize LED wait count to 0
g_wait_count ← 0
LED wait count update
g_wait_count ++
Figure 5.24 Wait Function for LED Blinking
5.9.19 TAU0 channel 3 count complete interrupt function
Figure5.25 shows the flowchart for the TAU0 channel 3 count complete interrupt function.
Figure 5.25 TAU0 Channel 3 Count Complete Interrupt Function