Renesas RL78 - Page 22

RL78/G11 UART Reception in STOP Mode Using Middle-speed On-chip Oscillator IAR
R01AN3634EJ0100 Rev.1.00 Page 22 of 85
Feb. 15, 2017
Function name: R_TAU0_Channel3_Start
Outline TAU0 channel 3 operation start function
Header r_cg_tau.h
Declaration void R_TAU0_Channel3_Start (void)
Description Sets TAU0 channel 3 to operation enabled state.
Argument None
Return value None
Additional notes None
Function name: R_TAU0_Channel1_Start
Outline TAU0 channel 1 operation start function
Header r_cg_tau.h
Declaration void R_TAU0_Channel1_Start (void)
Description Sets TAU0 channel 1 to operation enabled state.
Argument None
Return value None
Additional notes None
Function name: R_TAU0_Channel1_Stop
Outline TAU0 channel 2 operation stop function
Header r_cg_tau.h
Declaration void R_TAU0_Channel1_Stop (void)
Description Sets TAU0 channel 1 to operation disabled state.
Argument None
Return value None
Additional notes None
Function name: R_TAU0_Channel3_Stop
Outline TAU0 channel 3 operation stop function
Header r_cg_tau.h
Declaration void R_TAU0_Channel3_Stop (void)
Description Sets TAU0 channel 3 to operation disabled state.
Argument None
Return value None
Additional notes None
Function name: r_processing_pause
Outline Wait function for LED blinking
Header intrinsics.h
Declaration void r_processing_pause (void)
Description Executes wait for LED blinking
Argument None
Return value None
Additional notes None