Renesas RZ Series

RZ/G, RZ/V
Series
RZ Family / RZ/G, RZ/A Series 3. Operation Specifications
R01UH0990EJ0101 Rev.1.01 Page 63 of 83
Jul 28, 2022
3.1.4 SMARC edge Connector (CN4)
The RTK9743U11C01000BE can be connected to an external expansion board through the Carrier board connecting
connector (CN4).
Figure 3.5 illustrates the layout of Carrier board connecting connector pins. For the assignment of Carrier board
connecting connector pins, please refer to the section 4 “MODULE PIN-OUT MAP” of the document “SMARC
module 2.1 Specification (sget.org)”.
Figure 3.5 Layout of Carrier Board Connecting Pins