Renishaw ATOM

62
ATOM linear encoder system
15
1
8
9
CAL button operation
Push and release (<2seconds) – Calibration (CAL) routine initiation / exit.
Pushand release (>3seconds) – Automatic Gain Control (AGC) initiation / exit.
Push and hold during power ‘Off / On’ cycle – Restore factory defaults.
40
6 min
33.3
R> 10 Static bend radius
R> 20 Dynamic bend radius
8
4-40 UNC × 2
52
16
CAL button
access hole
Ø3.15
Ri interface drawing
Dimensions and tolerances in mm