How to fix the blocked nozzle on Renkforce RF100 XL 3D Printers?
To address a blocked nozzle on your Renkforce 3D printer, clean the inside of the nozzle. If the issue persists, remove the extruder and clean its interior. Also, check if the extruder fan is defective and replace it if necessary.
What to do if the filament is jammed on Renkforce RF100 XL?
If the filament is jammed and cannot be removed from your Renkforce 3D printer, try loading and then extracting some filament.
General| Layer Resolution | 0.05 - 0.3 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Print Speed | 20 - 100 mm/s |
| Connectivity | USB, SD card |
| Bed Leveling | Manual |
| Display | LCD |
| Technology | FDM |
| Supported Materials | PLA, ABS |
| Print Bed | Heated |
Covers general safety rules, unauthorized modifications, and handling precautions.
Details main menu options like Preheat, Filament, Fan, Print, Move, Home, MotorOFF, and Setting.
Guides on setting optimal nozzle temperature for print quality and filament.
Provides tips to avoid nozzle clogs during operation and filament handling.
Step-by-step guide to calibrate the print bed for proper adhesion and print quality.
Instructions for mounting the filament spool and inserting the tube.
Steps for loading filament into the extruder, including preheating.
Details how to unload filament from the extruder.
Instructions for swapping filament types or colors, including heating the extruder.
Guides on selecting the SD card as a print source via the control panel.
Explains how to select a USB stick as a print source.
Details how to select and initiate a print job from the SD card or USB.
Details connecting the printer and manually installing USB drivers for Windows.
Explains how to set up printer profiles for Mac OS within Cura.
To Next Page
