REPLIGEN XCell ATF 2 - Xcell ATF 2 Stainless Steel Tubing Set Kits and Accessories; Table 5. Headplate Fitting Part Numbers; Table 6. Xcell ATF 2 Tubing Set Kit Options; Table 7. Xcell ATF 2 Required Accessories

XCell® ATF 2 and 4 Stainless Steel Housings
User Guide
13
SG-SSATF24 rev 1
Table 5. Headplate fitting part numbers
Head plate fitting Bioreactor
HP:MPP-19 3 L Applikon
HP:MPP-M26 5 - 10 L Applikon
HP:BBI-M26 Sartorius/BBI
HP-PG13.5L Millipore Mobius® CellReady
PG13.5 Generic
6.4.1 XCell® ATF 2 Stainless Steel tubing set kits and accessories
Several components are required to connect the XCell® ATF 2 Stainless Steel Housing to a bioreactor.
XCell® ATF 2 autoclavable tubing set kits (Table 5
) are available in three configurations depending on
the type of bioreactor in use and the preferred connectors. All tubing set kits have a pressure rating
of 25 psi. Additional accessories (
Table 6) are required, regardless of the chosen tubing set.
Table 6. XCell® ATF 2 tubing set kit options
Tube set part number Tubing connection Use
ATF2-A2B-TC Tri-clamp/tri-clamp ATF to bioreactor
ATF2-A2B-RMTC GE ReadyMate™/tri-clamp ATF to bioreactor
ATF2-A2B-TCAQ AseptiQuik®/tri-clamp ATF to bioreactor
ATF2-A2B-AQ AseptiQuik®/ AseptiQuik® ATF to bioreactor
Table 7. XCell® ATF 2 required accessories
Description Part number Single/Multi-use
Pressure
rating
ID
Material of
construction
Top and bottom
permeate and drain
SSATF2-TSK SU 25 psi 0.25”
Platinum-
cured silicone