REPLIGEN XCell ATF 2 - Xcell ATF 4 Stainless Steel Housing Tubing Set Kits and Accessories; Table 8. Headplate Fitting Part Numbers; Table 9. Xcell ATF 4 Tubing Set Kit Options; Table 10. Xcell ATF 4 Required Accessories

XCell® ATF 2 and 4 Stainless Steel Housings
User Guide
19
SG-SSATF24 rev 1
Table 8. Headplate fitting part numbers
Head plate fitting Bioreactor
HP:MPP-19
3 L Applikon
HP:MPP-M26
5 -10 L Applikon
HP:BBI-M26
Sartorius/BBI
HP-PG13.5L
Millipore Mobius® CellReady
PG13.5
Generic
7.3.1 XCell® ATF 4 Stainless Steel Housing tubing set kits and accessories
Several components are required to connect the XCell® ATF 4 Stainless Steel Housing to a bioreactor.
XCell® ATF 4 autoclavable tubing set kits (Table 9
) are available in three configurations depending on
the type of bioreactor in use and the preferred connectors. All tubing set kits have a pressure rating
of 25 psi. Additional accessories (
Table 10) are required, regardless of the chosen tubing set.
Table 9. XCell® ATF 4 tubing set kit options
Tube set part number Tubing connection
ATF4-A2B-TC Tri-clamp
ATF4-A2B-TCAQ AseptiQuik®
Table 10. XCell® ATF 4 required accessories
Description Part number
Single- or
multi-use
Pressure
rating
ID
Material of
construction
Top permeate and drain SSATF4-TSK SU 25 psi 1/4”
Platinum-cured
silicone
Dip tube
TC:DIP-10/250 or
TC:DIP-10/450
MU N/A 3/8” 316 L SS
Pressure sensor kit SSATF4-PSK-V2 SU 25 psi 3/8” Polycarbonate