What to do if my Respironics BiliTx Medical Equipment device will not turn off?
If your Respironics Medical Equipment device doesn't turn off when you press the Therapy On/Off button, try pressing and holding the Therapy On/Off button for 3 seconds.
How to fix a Respironics Medical Equipment with Therapy On/Off button that is not green?
If the Therapy On/Off button on your Respironics Medical Equipment is not green, check to ensure the power cord is properly attached and plugged into an active electrical outlet. Also, make sure the device is turned on.
What to do if light is not being emitted from the fiber optic panel of my Respironics Medical Equipment?
If light is not being emitted from the fiber optic panel of your Respironics Medical Equipment, check to make sure the panel is securely locked into the Illuminator device.
What to do if Therapy On/Off button is not flashing green on my Respironics Medical Equipment?
If the power cord is properly attached and plugged into an active electric outlet and the Therapy On/Off button is not flashing green on your Respironics Medical Equipment, but the device will turn on, continue to use the device for therapy.
How to fix Respironics BiliTx when light is not emitted and yellow LED is flashing?
If light is not being emitted from the illuminator device when connected to the circuit support adapter and the yellow LED is flashing on your Respironics Medical Equipment, check to make sure the Illuminator device is securely attached to the circuit support adapter accessory.
General| Application | Phototherapy for neonatal jaundice |
|---|---|
| Light Source | LED |
| Irradiance | 35 µW/cm²/nm |
| Timer | Yes |
| Electrical Requirements | 100-240 V AC, 50/60 Hz |
| Power Source | AC Power |
| Indication | Treatment of hyperbilirubinemia in neonates |
| Type | Phototherapy device |
Defines the intended purpose and application of the BiliTx Phototherapy System.
Explains the technology and modes of operation of the BiliTx phototherapy system.
Lists and illustrates the various components included in the BiliTx system.
Highlights critical safety information regarding the use and operation of the BiliTx system.
Provides important precautions to prevent damage to the device or improper operation.
Explains the meaning of various symbols used on the BiliTx system.
Verifies system light intensity and begins fiber optic panel setup.
Steps for preparing a baby for phototherapy using the wrap-around fiber optic panel.
Covers flat neonatal panel setup and overhead phototherapy configuration.
Instructions for using the optional in-use carrying case with the Illuminator device.
Procedures for cleaning the BiliTx Illuminator device and fiber optic panel.
Covers maintenance schedule, customer service contacts, and helpful tips.
Lists common problems and their solutions for the BiliTx system.
Details environmental conditions for storage/operation and physical dimensions of the BiliTx system.
Provides data on irradiance levels, wavelengths, and panel dimensions.
Details overhead spectral irradiance, radiometer certification, and intensity.
Covers standards compliance, electrical requirements, and disposal guidelines for the BiliTx system.
Provides guidance on electromagnetic emissions compliance for the BiliTx system.
Provides guidance on electromagnetic immunity compliance for the BiliTx system.
To Next Page