Need help?Do you have a question about the Retevis RT76P and is the answer not in the manual?
General| Channel Capacity | 16 |
|---|---|
| Power Output | 5W |
| Battery Type | Li-ion |
| Weight | 220g |
| Water Resistance | IP67 |
| Antenna Impedance | 50Ω |
| Audio Distortion | ≤5% |
| Operating Temperature | -20°C to +60°C |
| Frequency Range | 400-470MHz |
| Operating Voltage | 7.4V |
| Modulation Mode | 16K0F3E/11K0F3E |
| Maximum Deviation | ±5kHz |
| Receiver Sensitivity | ≤0.2μV |
| Range | Up to 5km |
Lists the standard accessories included with the transceiver.
Important notices regarding battery charging and performance.
Specific advice on using the correct charger to avoid hazards.
Instructions for fitting and detaching the battery pack from the intercom.
Guide to installing belt clip, strap, and audio accessories.
Identifies and describes the main parts and controls of the RT76P transceiver.
Details the buttons and connectors on the sides of the transceiver.
Describes PTT, side buttons, LCD display, and band/mode switching operations.
Explains the use of menu, number, *, #, and 0 buttons for various functions.
Covers power control, status lights, external jack, and LCD screen functionality.
Explains icons related to signal, power, modes, and frequency differences.
Details icons for lock, emission, battery, and channel information.
Covers squelch, step, power, power save, VOX, bandwidth, and backlight settings.
Configuration for dual standby, beep prompts, VOICE, and CTCSS/DCS reception.
Settings for transmitting CTCSS/DCS, DTMFST, and voice companding.
Covers S-CODE, scan modes, ANI Match, and PTT-ID configurations.
Details PTT-ID options, display modes, busy lockout, and auto lock.
Settings for frequency direction, offset, and LED indicator colors.
Covers tail function, language selection, and device reset procedures.
How to perform FM radio search and check battery voltage.
Detailed guide on activating and using the Voice Operated Exchange (VOX) feature.
Explains how to enable and disable automatic and manual keyboard locking.
Covers dual standby operation, voice compandor, and DTMFST monitoring.
Details R-TONE, R-CODE, scan modes, and ANI Match functions.
Specific procedures for making individual and group calls using ID codes.
Instructions for initiating group and all calls with specific ID sequences.
Guide to using the DTMF editor to customize ID codes for fast sending.
Covers PTT-ID modes, alarm functions, and the tail transmission feature.
Explains remote stun, talk around, and reverse frequency functionalities.
Lists frequency range, voltage, antenna impedance, and transmitter parameters.
Provides details on receiver sensitivity, audio distortion, and selectivity.
Lists default settings and CTCSS/DCS codes for GMRS channels 1-16.
Lists default settings and CTCSS/DCS codes for GMRS channels 17-30.
To Next Page
