6.6 Inserting the Grinding Set
Cutting injuries
Sharp cutting edges
− The sharp cutting edges on the rotors and/or the cutting bars in the
grinding chamber can lead to hand lacerations.
• Grasp the rotor only on the hub and do not touch the cutting edges
or bars.
• Wear cut-resistant safety gloves.
Wear or damage of the device
Operation without grinding set
− During operation of the device without grinding set, excessive wear or
damage to the device may occur.
• Operate the device only with a grinding set mounted.
Fig. 16: Insertion of the grinding set consisting of grinding insert, bottom sieve and rotor
To Next Page
Loading...
