Rexing S300 - Device Installation; Mounting the Camera; Connecting the Charger; Inserting the Memory Card

19
© 2015 REXING A ll Righ ts Re s er v ed .
Getting Started
Installing your S300 Dashboard Camera
Installation
1. Attaching the camera to the window mount
Before the device can be used in a car, it is essential to first install a properly
attached window mount. Make sure that you place the recorder in a safe,
appropriate location where it will not obstruct the driver’s view.
2. Connecting the charger to the car's 12V DC outlet
Be sure to connect only the Rexing-approved charger designed and supplied
specifically for use with your device. Using an incompatible charger can
cause serious personal injury or damage to your device.
3. Inserting a memory card
You will need to insert a memory card before you can begin recording. The
recorder supports MicroSD cards with a capacity of up to 32GB. For reliable
operation, use a Class 10 memory card with a capacity of at least 8GB.
DO NOT insert or remove a memory card while the device is in operation.