Rexing S300 - Motion Detection; Wide Dynamic Range (WDR)

31
© 2015 REXING A ll Righ ts Re s er v ed .
Operating your S300 Dashboard Camera
System / Video Settings
Motion Detector
Your device can be used as a remote surveillance camera with motion detection
capability. When this feature is enabled, the built-in camera can detect
movement in the surrounding area using an advanced motion detection
algorithm. If movement is detected, the device will automatically enter
Recording Mode.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Motion Detection" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
WDR (Wide Dynamic Range)
When enabled, this feature automatically adjusts exposure settings to improve
recording quality in particularly bright or dim environments, providing balanced
lighting and clearer recorded video.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "WDR" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings