Rexing S300 - Recording Resolution; Date and Time Stamp

27
© 2015 REXING A ll Righ ts Re s er v ed .
Operating your S300 Dashboard Camera
System / Video Settings
Resolution
Use the following procedure to set the recording resolution:
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Resolution" option
3. Press OK to view available resolutions: 1080FHD/1920x1080,
720P/1280x720, etc.
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Date and Time Stamp
You have the option to display the date and time in your videos. Note that the
date and time stamp cannot be removed from videos if this feature was enabled
at the time of recording.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Date Stamp" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings