Rexing S300 - System and Video Settings; Date and Time Setup; Language Selection

26
© 2015 REXING A ll Righ ts Re s er v ed .
Operating your S300 Dashboard Camera
System / Video Settings
SYSTEM / VIDEO SETTINGS
Date/ Time Setup
Use the following procedure to change the device’s time and date:
1. Press MENU twice to enter System Settings
2. Press the DOWN button to navigate to the "Date/Time" option
3. Press OK to view date/time in the format: YYYY/MM/DD HH:MM:SS
4. Press the UP or DOWN button to change the highlighted number
5. Press MODE button ( ) to move to the next date/time and repeat step 4
6. Press OK again to confirm your entry
7. Press MENU to exit System Settings
Note: If the battery remains fully discharged or is removed from the device, the
time and date will be reset.
Language
Use the following procedure to change the device’s time and date. Language
availability may vary depending on the region.
1. Press MENU twice to enter System Settings
2. Press the DOWN button to navigate to the "Language" option
3. Press OK to view the current language selection
4. Press the UP or DOWN button to change the selection
5. Press OK again to confirm your choice