30
© 2015
REXING
A
ll Righ
ts
Re
s
er
v
ed
.
Operating your S300 Dashboard Camera
System / Video Settings
LCD Display (Screen Saver)
Select a time duration for the screen to stay lit after recording starts.
(If you cannot find this option, please follow instructions for installing the latest
firmware update, page 43.)
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Screen Saver" option
3. Press OK to view the current selection: 1min / 3min / OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings
Alternatively, you can use a hot key shortcut for this feature. During Recording
Mode, press and hold OK to turn the LCD screen on or off.
Auto Power Off
When enabled, this option allows the device to shut down automatically if
Recording Mode is not engaged.
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Auto Power Off" option
3. Press OK to view the current selection: 3min/5min/10min/OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings
To Next Page
Loading...
