Rexing S300 - Quick Review of Photos; Date Stamp for Photos

42
© 2015 REXING A ll Righ ts Re s er v ed .
Operating your S300 Dashboard Camera
Photo Settings
Quick Review
Enabling this feature will allow you to immediately view each captured image for
a few seconds before taking the next photo.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Quick Review" option
4. Press OK to view the current selection: OFF/2SEC/5SEC
5. Press the UP or DOWN button to make your selection
6. Press OK to confirm your entry
7. Press MENU to exit Photo Settings
8. Press OK to capture an image
Date Stamp
This feature will automatically apply a date and/or time stamp to captured
images.
1. Press MODE once to enter Photo Mode
2. Press MENU once to enter Photo Settings
3. Press the UP or DOWN button to navigate to the "Date Stamp" option
4. Press OK to view the current selection: OFF/Date/Date&Time
5. Press the UP or DOWN button to make your selection
6. Press OK to confirm your entry
7. Press MENU to exit Photo Settings
8. Press OK to capture an image