32
© 2015
REXING
A
ll Righ
ts
Re
s
er
v
ed
.
Operating your S300 Dashboard Camera
System / Video Settings
Gravity Sensing
This feature acts as an accelerometer, measuring physical and gravitational
forces acting on the camera itself. In the event that such forces are detected,
the device will perform an automatic file lock. (Locked video files cannot be
erased during Loop Recording; they remain on the memory card until manually
deleted or the card is reformatted.) We recommend that you use the "Low"
setting for this feature.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Gravity Sensing" option
3. Press OK to view the current selection: Low/Medium/High/OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit Video Settings
Beep Sound
This setting allows you to turn the device's button sound effect on or off.
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Beep Sound" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to confirm your entry
6. Press MENU to exit System Settings
To Next Page
Loading...
