Audio streaming Audio streaming20 21
The setup depends on the device type:
Standard line-in devices and FM receivers must only be
plugged in.
Bluetooth phones and Bluetooth audio devices must be
paired once before audio streaming is possible. Refer to
section "Pairing Bluetooth devices".
Our specific transmitters must also be paired once, but
the procedure is slightly different.
Refer to section "Pairing our specific transmitters".
Further information:
FM receivers: The same signal is transmitted to both
hearing instruments (mono sound).
Transmitters: You can also use third-party transmitters.
Smart Connect treats them like other Bluetooth
devices.
We recommend to use our specific transmitters.
Pairing Bluetooth devices
Every Bluetooth device has to be paired once with
Smart Connect. After that, the connection is automatically
established when Smart Connect is turned on and the
Bluetooth device is within operating distance.
Bluetooth devices are, for example, Bluetooth phones, TV,
tablets or third-party transmitters.
The procedure for pairing and using our specific
transmitters is slightly different. Refer to section
"Using our specific transmitters".
Preconditions:
Bluetooth device is turned on.
Smart Connect is turned on.
Neckloop is plugged into both sides, and
Smart Connect is worn around the neck.
To Next Page