3.4.2.2 Custom the Output Resolution
1. Push the [MENU] button, and enter to menu items, turn the rotary knob, select <Standard>.
2. Turn the rotary knob to select <Output Resolution>, and select <customs>, push the knob to
confirm, and enter to the menu items as follows:
3. Turn the knob on each digital position, and change the value of the digital by the digital
buttons on the front panel. For example, input 1536 as following:
4. After the digital, push the knob will add *, means before the * is the horizontal size. Same
operation for vertical size, for example input1536 as following:
To Next Page
Loading...
