RGBlink VENUS X1 PRO-E - Standard Mode Usage

Chapter 3: Using Your Product
VENUS X1PRO-E User Manual
23
->Standard >>
Split >>
Preview >>
Stand Alone Mode >>
->Standard >>
Custom >>
Output Resolution
*1920x1080x60
->Advanced >>
语言/Language English
Factory Reset >>
3.4 Standard Mode
In standard mode, four output channels output the same signal and resolution. Each Output port
support maximum 4 layers. This is the default mode following a reset and adapt to 1920x1080
screen.
3.4.1 Single Image Switching
Default DVI1 for the current input source, if another signal is needed, for example, DP, push the
DP button.
DVI button light will be off after pushing the DP button, and DP button light will be on if the DP
signal is effective and stable. If the DP signal is invalid or no input, DP button light will flash.
Same with above, switch the signals among DVI1, DVI2, DP and input optional signals.
3.4.2 Set the Output Resolution
3.4.2.1 Select the Output Resolution
1. Push the [MENU] button, and enter to menu items, turn the rotary knob, select <Standard>.
2. Turn the rotary knob to select <Output Resolution>, <Standard> or <customs> can be selected.
3. Default <Standard> option, push the knob to confirm. Turn the rotary knob, and select the
output format according to actual need.