RGBlink VENUS X1 PRO-E - Logo Management

Chapter 3: Using Your Product
VENUS X1PRO-E User Manual
41
-> LOGO Load >>
LOGO Capture >>
-> Select Layer Layer A
LOGO Select LOGO_1
LOGO On/Off Off
-> Save to LOGO_1
Select Layer Layer A
Select Input DVI1
LOGO Freeze Off
-> LOGO On/Off Off
Start Capture LOGO
DVI 3: The output port brightness adjustment range within 0~128
DVI 3: The output port brightness adjustment range within 0~128
3.9 Logo Setting
Push the [Logo/5] button or Push [MENU], Select <Advanced>and push rotary to confirm, then
select <Logo Setting>, enter into menus as follows:
LOGO Load
Select <Logo Load> and enter menus as follows:
Select Layer: Layer A to D can be selected.
Logo Select: Total LOGO1~10 can be selected.
LOGO On/Off: Enable or disable Logo load function.
LOGO Capture
Select <Logo Load> and enter menus as follows:
Save to: Total can be save 10 Logos, from LOGO_1~LOGO_10
Select Layer: Layer A to D can be selected.
Select Input: DVI1, DVI2, DP and input option signal can be selected.