RGBlink VENUS X1 PRO-E - Recall Saved Settings

Chapter 3: Using Your Product
VENUS X1PRO-E User Manual
44
RECALL SAVE
->SAVE 1
Button on is ready for recall
Button flashes means just recall
3.12 Recall Saved Settings
VENUS X1PRO-E provides 24 positions for saving or recording parameters. To recall saved
settings:
1. Push the [LOAD/6] button, the button light is on, and enable the LOAD function:
2. Turn the rotary knob, and select the position that will load, push the knob to confirm.
3. Push the [LOAD/6] button again, the button light is off, and disable the LOAD function.