Beijing RuiZhitianhong technology Co.Ltd.
ADD.：A308 jiahua building, 9 Shangdi 3rd Street, Haidian District, Beijing. P.C.：100085.
Dell：+86-10-62970368/82923063 Fax：+86-10-82920078 URL：www.richnc.com.cn 36
Fall scale ， system default is 0.200.fall speed=fast speed*fall scale ， the
maximum fall speed is Z axis negative limit speed*fall scale.
Fall height，system default is 5.000mm，fall down scale takes effect when the
spindle falls to the fall height.
Setting：Enter “Fall Scale”，screen shows：
Same operations as “Low Manual Spd”.
Setup stop position after auto processing. ， User can set special position and
specified position.
Set stop position：Press“ ”、“ ” move cursor to where users want
to modify，press “ ” and input the new number，press“ ”to save.
Press “ ”，user can enter stop statue list：
To Next Page
